Heat Detector TMP2 JO and TO (Atex Zone 1 + EN54-5)
DESCRIPTION:
ATEX zone 1 certified II 2G Ex d IIC T6 and EN54-5 certified for temperatures A2 (54° to 70°C) and C (84° to 100°C) heat detector.
Rate of Rise and/or static alarm. LED status: OFF in normal condition, ON in alarm. Or PULSE in normal condition, OFF in Fault condition, ON in alarm condition. Automatic or manual Reset. IP65 aluminiun alloy housing with window and chrome plated brass probe (stainless steel available).
One 1/2″ NPT way connection opposite to the probe side (JO model) or two 1/2″ NPT way connections on the two sides (TO model) .
FEATURES:
- Interactive
- To be used in industrial hazardous areas
- Protective PCB coating
- Short circuit isolator
- Conforms to EMC directive
- Immune to electromagnetic disturbance
- High reliability due to Self-diagnosis procedure
- Programmable LED for status indication
- Two wires technology - Low power consumption
- Temperature set-point levels from -20°C up to 110°C.
- Configurable classes A1, A2, B, C, D
- Different output configurations. Static and/or Rate of Rise
- Proven technology
- Not influenced by dust, humidity, exhaust gases.
- EN54-5 CPR Certified
- Tested with internal climatic tunnel on production line
- shock and vibration resistant
APPLICATIONS
- Commercial and Industrial plants
- Hazardous atmospheres (Classified areas Zone 1 and Zone 2)
- Suitable in dangerous environmental conditions such as in presence of corrosive elements or condensing steams
- Suitabe to be used with all Conventional Fire Detection Systems
Especially suitable for:
- Refineries and Hazardous material stores
- Extraction ducts
- Boiler rooms
- Workshops
- Oil & Gas plants
- Pumping rooms
- Refrigeration cells
Certificate ATEX II 2G Ex d IIC T6
Certificate EN54-5 CPR
“TMP2-Config”: NEW diagnostic and configuration software for:
- Monitoring of sensors and detector functions
- Alarm Temperature Levels setting
- Temperature Class setting according to EN54-5
- Static or Rate of Rise functionality setting
- LED functioning mode setting
- Alarm Status setting (Latched or Reflex)
- Service time counter
- Number of events counter
- General information: sensor status, reset, number of power ON and power OFF
TECHNICAL SPECIFICATIONS:
ENVIRONMENTAL SPECIFICATIONS:
ELECTRICAL SPECIFICATIONS:
11mA ±3mA @ 13,7 Vdc11mA
12mA ±3mA @ 24 Vdc
MECHANICAL SPECIFICATIONS:
ATEX version: 160x85x75 mm
DUST version: 203x95x60 mm
ATEX version: 410 g.
DUST version: 400 g.
ATEX version: 1/2" NPT
DUST version: 2 x M20 Cable Holder (Cables diameter 6 to 13 mm)