Sense-WARE Triple IR3 Flame Detector IR3-109/1
The Sense-WARE Triple IR3 Flame Detector is designed to give optimum performance for Zone 2 and Safe Area flame detection.
The Sense-WARE Triple IR3 Flame Detector is designed to give optimum performance for Zone 2 and Safe Area flame detection.
The Sense-WARE UV Flame Detector is designed to give optimum performance for Zone 2 and Safe Area indoor flame detection.
The Sense-WARE UV/IR Flame Detector is designed to give optimum performance for Zone 2 and Safe Area flame detection.
ATEX zone 1 certified II 2G Ex d IIC T6 and EN54-5 certified for temperatures A2 (54° to 70°C) and C (84° to 100°C) heat detector.
ATEX zone 1 certified II 2G Ex d IIC T6 heat detector, with rate of Rise and/or static alarm.
Aluminium housing IP66 heat detector. Static and/or Rate of Rise alarm temperature.
ATEX II 2 G Ex d IIC T6 heat detector with proportional 4-20mA output, range -10° +100°C (-10°=4mA +100°=20mA).
The High Temperature coated linear heat cable is manufactured from two different types of nylon, with the outer sheath being a chemical resistant material.
A Nylon coated cable is the common choice when hazardous hydrocarbons such as fuel oils, diesel, kerosene etc. are present.
The stainless steel braided linear heat detection cable provides the ideal solution for areas where the cable may be accidentally cut or where it may be subject to mechanical abrasion.
A Nylon coated cable is the common choice when hazardous hydrocarbons such as fuel oils, diesel, kerosene etc. are present.
The standard coating used on Digital cables is made from PVC and is suitable for most environments.
The Digital Interface Monitor Module (DiMM) is a dual zone module for monitoring up to two zones of Digital Linear Heat Detection (DLHD) Cable.
The standard coating used on Analogue cables is made from PVC and is suitable for most environments.
A Nylon coated cable is the common choice when hazardous hydrocarbons such as fuel oils, diesel, kerosene etc. are present.
A Nylon coated cable is the common choice when hazardous hydrocarbons such as fuel oils, diesel, kerosene etc. are present.
Stainless steel braiding over the outside of the FyreLine cable provides the ideal solution for areas where the cable may be accidentally cut or where it may be subject to mechanical abrasion.
The analogue leader cable is designed to be an interposing cable between the analogue FyreLine control module and sensing cable.
The analogue control module is designed for use with FyreLine Analogue Linear Heat Detection cables.
The FGDS Self Compensating Duct Probe (SCDP) has been designed to allow simple, trouble free, representative sampling of duct environments.